Skip to product information
JL Front 1350 Solid CV Driveshaft 2 or 4 Door with Ult 60s Adams Driveshaft
HVHK_ASDJL-1350F-S-D60ULT
$749.95 USD
Description
This Extreme Duty Series Solid 1350 CV Driveshaft will work up to 42 inch Tall Tires. Bigger tires add more Weight, Traction, and more Pressure on your Drivetrain Components like your Driveshafts, Axles, Gears, Etc., so you want to make sure you are buying the right driveshaft for your Jeep. This Driveshaft will work up to a 4 inch Lift after that the angle may be too Severe or it may Bind.
We will need a Center of u-joint to Center of u-joint Measurement like the picture belows shows. Must be measured on the ground at ride height. If you have coil overs then we would need a Collapse, Ride Height, and Full Extension Measurement. You could use the measurement chart below to get the measurement.
Benefits for Buying an Adams Driveshaft:
- Front Driveshaft Part Number ASDJL-1350F-S-D60ULT
- Made out of 2 inch X .120 Wall D.O.M. tubing that is Double the Strength of the Factory Tubing and will clear the exhaust and cross member eliminating damage to the driveshaft at full droop.
- Has Long Full Spline Slip n Stub unlike some of our Competitors.
- Built only with Components made by Adams Forged Parts, Spicer and Neapco.
- Has the Strongest Solid Non Greasable U-joints on the Market. You Break the U-joint we replace it.
- Comes with Grade 10 CV Bolts with small heads on them so they are easier to install and a Packet of Loctite. Our Competitors use grade 8.
- Driveshafts come painted Gloss Black Show Quality.
This Item will include the following parts:
- (1) 2 inch X .120 Wall Extreme Duty 1350 CV Driveshaft with Solid Non Greasable U-joints, with a OEM Style Flange. Lifetime Warranty if you twist our tube, break a weld, or break a U-joint in half due to Torque.
- (1) American Made Front 1350 Half Round Transfer Case Output Shaft Yoke.
- (4) Grade 10 CV bolts.
- (1) Adams Driveshaft T-shirt
Notes:
- Due to Jeep changing their angles on the JT and JL Models, if you install an After Market Differential and the driveshaft spins full-time, it may result in a vibration and/or premature U-joint and CV failure due to angles.
- Must Have a 1350 Pinion Yoke On The Differential.
Application:
- Fits A 2018 - Present Jeep JL Wrangler 2 Or 4 Door Rubicon - Sahara- Sport Models
Specifications:
| Country of Origin | USA |
| Availability | Available |
| Location | Front |
| Universal | No |
| Doors | 2 Door |
| About |
Adam's Driveshaft and Off Road was founded in 1996 in Henderson, Nevada by two best friends who met in kindergarten. James Adams is the president and runs the day to day operations. He has over 35 years experience as a Drivetrain Specialist. He worked at Driveline Service of Las Vegas for 15 Years before starting his own business. His partner chose a little different path going through college and getting his MBA. The founders' first business operation was when they each had paper routes in elementary and middle school. One delivered the morning paper and the other did the evening. While these jobs gave them experience in working hard and taking care of customers, the best part was the BMX bicycles they bought with their first few checks. Over the years they received recognition for their many achievements. Adams Driveshaft has been in Multiple Magazines, Videos, and Interviews over the Years, and have Built Driveshafts for many Competition Vehicles that have competed in the KOH, Trophy Truck, Etc. One of there favorite Accomplishments was when they Built the Driveshaft for the World Record Fastest M.P.H Diesel Vehicle that was done out on the Salt Lake Flats. With their dedication to Customer Satisfaction they have become one of the most respected automotive specialty shops in the United States. Their focus is on all things Drivetrain related; Custom and OEM Style Driveshafts, Ring and Pinion Gears, Bearing Kits, Lockers, Limited Slip Posi's, Axles, and Suspension Lift Kits and Accessories for Jeeps, Trucks, and Offroad Vehicles. We have four State of the Art Driveshaft machines, Mills, and Lathes that we use to custom make Driveshafts all day long. We also only use the Best Components manufactured by American Companies Spicer, and Neapco. We have a saying you are only as good as the parts you use and you are only as good as your worst employee. Our staff has over 60 Years Combined in the industry and is very knowledgeable in the Drivetrain Field. Most of our employees have been with Adams Driveshaft, Inc. since the day they opened. |
Shipping
This product is shipped directly from our supplier to ensure faster handling and availability. Because it is drop shipped, processing and delivery times may vary slightly from our standard in-stock items. You will receive tracking information as soon as your order ships, and our team is always here if you have any questions along the way.
Return policy
Our return policy is outlined in detail on our Return Policy page. Please note that certain items may be subject to additional requirements or restrictions set by the manufacturer, which must be met for a return to be accepted. If you have any questions before purchasing, our team is happy to help clarify any specifics.
