Jeep JK 2 Door Alpine CT3 Suspension System 3 Inch Lift w/ Falcon 3.3 Shocks 07-18 Wrangler JK TeraFlex

TeraFlex Alpine CT (Cross-Trail) Suspension Systems build on our Sport ST (Street and Trail) Suspension Systems. Designed to tackle rugged trails or Baja silt beds as well as the daily commute, the 3 inch Alpine CT3 Short Arm Suspension System is the no-compromise choice for the true weekend warrior with a do-it-all attitude.

The Alpine CT3 features a complete set of our bolt-on adjustable Alpine Short Control Arms for full suspension adjustability both on- and off-road. Our adjustable Alpine Short Control Arms balance front caster angle and pinion angles as well as optimize rear pinion angles, anti-squat geometry, and tire position on vehicles with 2-4 inch lifts.

The HD Forged Adjustable Front and Rear (4 inch and up) Track Bars and Rear Track Bar Bracket improve steering response, center the axles to optimize vehicle roll center, and reduce body roll for unsurpassed handling. This results in improved suspension geometry and relaxed control arm angles for a superior ride quality and performance regardless of terrain.

These systems restore front and rear roll axis angles to minimize brake dive and acceleration squat. TeraFlex suspension systems provide reduced noise, vibration, and harshness (NVH). Alpine CT Suspension Systems are engineered for hardcore Jeeping without sacrificing weekday ride comfort!
Features:

• Alpine CT3:
  • Lift Height: 3 inch
  • Max Tire Diameter: 35 inch
• CT Short Arm Suspension Systems:
  • Adjustable Alpine Short Control Arms balance front caster angle and pinion angles as well as optimize rear pinion angle and tune anti-squat geometry for proper suspension alignment on 2-4 inch lift kits
  • Alpine Short Control Arms are constructed from durable 42mm x 4mm wall DOM tube for maximum strength
  • Bolts to the factory control arm mounting brackets
  • Install and drive simple bolt-on installation - no welding required
• Cross-Trail:
  • Delivers true Cross-Trail (CT) performance
  • Dependable performance w/ zero worries
  • Positive, responsive handling w/ reduced NVH
  • High-quality, dependable, maintenance-free, factory-style bushings provide excellent NVH damping and ride quality.
  • HD Forged Adjustable Front and Rear (4 inch and up) Track Bars and Rear Track Bar Bracket improve steering response, center axles to optimize vehicle roll center, and reduce body roll for unsurpassed handling
  • Front SpeedBump and rear Progressive Bump Stops provide progressive compression during high-speed suspension movement
  • Coil spring retainers prevent the springs from unseating during full suspension travel
  • Full range of movement for off-road flex and articulation
  • TeraFlex Limited Lifetime Warranty against defects

Fits:

• JK Wrangler (2-Door)
• Lift Height: 3 inch
• Max Tire Diameter: 35 inch

Includes:

• 3 inch Lift Coil Springs (JK2 Front: part number 1853102 and JK2 Rear: part number 1854102)
• Alpine Short Control Arm Kit - 8-Arm (2-4 inch Lift) (part number 1415610)
• HD Forged Adjustable Front Track Bar (0-6 inch Lift) (part number 1753418)
• Rear Track Bar Axle Bracket Kit (2.5 inch Lift) (part number 1954776)
• Speedbump and Progressive Bump Stop Kit - Front and Rear (part number 1958250)
• 10 inch Front Sway Bar Quick Disconnect Kit (3-4 inch Lift) (part number 1753000)
• 12.25 inch Rear Sway Bar Link Kit (3-4 inch Lift) (part number 1754500)
• Coil Spring Retainer Kit - Rear Upper (part number 4951400)
• Coil Spring Retainer Kit - Rear Lower (part number 4954300)
• Front Brake Line Anchor Kit (part number 1101255)
• Rear Brake Line Relocation Kit (part number 4304400)
• Exhaust Spacer Kit (part number 2610000)
• All necessary hardware And more
• Falcon Series 3.1 Piggyback Shock Kit (3-4.5 inch Lift) (JK2: part number 02-01-31-400-253)
• Falcon Series 3.3 Fast Adjust Piggyback Shock Kit (3-4.5 inch Lift) (JK2: part number 02-01-33-400-253)

Specifications: