{"product_id":"3-5-inch-lift-kit-ford-ranger-19-23-4wd-cast-steel-fox-2-0-performance-shocks","title":"3.5 Inch Lift Kit Ford Ranger 19-23 4WD Cast Steel Fox 2.0 Performance Shocks","description":"\u003cp\u003eImprove the performance and style of your 2019-2023 Ford Ranger truck by installing this 3.5-inch lift kit from BDS. Specially designed for the new Ranger, this 3.5 inch leveling kit is engineered for additional Tire clearance and improved performance without overextending the suspension or driveline angles at full suspension droop.\u003c\/p\u003e\u003cp\u003eTo prevent maxing out ball joints or CV damage, BDS gets around this issue by using a 2-piece design with a smaller top mounted steel strut spacer in combination with a preload spacer.\u003c\/p\u003e\u003cp\u003eTo further ensure proper drivetrain geometry the front differential is repositioned using relocation brackets. These brackets correct CV axle angle while allowing the use of the factory front skid plates. Also supplied for the front end are a pair of performance upper control arms (UCAs) designed for improved strength and suspension travel.Р’В \u003c\/p\u003e\u003cp\u003eUp front, the lift kit includes steel top mount strut spacers, pre-load spacers, differential relocation brackets and tubular upper control arms. In the rear, this kit\u003c\/p\u003e\u003cli\u003eIncludes heavy duty lift shackles and custom-tuned NX2 Nitro or FOX Performance series shocks.Р’В \u003c\/li\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eHD Upper Control Arms (UCAs)\u003c\/p\u003e\u003cp\u003eBuilt for strength, performance and increased travel, these upper control arms are ready to bolt-in with most leveled\/lifted trucks. They use 1.5 inch OD x .120-wall tubular construction with an indexed ball joint cup to correct the ball joint positioning allowing additional down travel and camber adjustment.\u003c\/p\u003e\u003cp\u003eAt the frame mounting ends are durometer-specific rubber bushings for maintenance-free operation while at the other end a quality greaseable ball joints for smooth, quiet operation and superior durability.\u003c\/p\u003e\u003cp\u003eArms are finished in a durable black powder coat with a billet aluminum dust cap ready for installation right out of the box.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFront Lift Method: Strut Spacer\u003c\/li\u003e\n\u003cli\u003eRear Lift Method: Shackle\u003c\/li\u003e\n\u003cli\u003eShocks Included: Yes\u003c\/li\u003e\n\u003cli\u003eFront Lift Height: 3.5 inch\u003c\/li\u003e\n\u003cli\u003eRear Lift Height: 1 inch\u003c\/li\u003e\n\u003c\/ul\u003e\u003col\u003e\n\u003cli\u003eAftermarket wheels must have a minimum of 93.1mm center hub bore.\u003c\/li\u003e\n\u003cli\u003eTires larger than 285\/70r17 or 285\/65r18 cannot be installed on factory wheels due to steering knuckle clearance.\u003c\/li\u003e\n\u003cli\u003eWill NOT work on trucks equipped with cast steel steering knuckles\u003c\/li\u003e\n\u003c\/ol\u003e\u003cul\u003e\n\u003cli\u003eEasy, 100 percent Bolt-on installation\u003c\/li\u003e\n\u003cli\u003eMaintains factory like ride quality\u003c\/li\u003e\n\u003cli\u003eStandard NX2 Nitro shocks with vehicle-specific valving for better control\u003c\/li\u003e\n\u003cli\u003eUpgrade to FOX 2.0 Performance Series shocks for maximum performance on and off-road\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOE Knuckle Type\u003c\/p\u003e\u003cp\u003eFord is producing two knuckle\/control arm configurations in 2020+ model Rangers. Cast steel knuckle equipped models have different ball joints than models equipped with Aluminum knuckles. Be sure to verify which factory knuckle your truck has before ordering by referencing our help images when customizing your kit.\u003c\/p\u003e\u003cp\u003eTire Size: 305 \/ 55 Wheel Diameter: 20 x 9 Back Spacing: 5\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFOX 2.0 Performance Series\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2-inch Impact extruded aluminum body\u003c\/li\u003e\n\u003cli\u003eInternal floating piston (Internal Floating Piston) monotube design\u003c\/li\u003e\n\u003cli\u003eCNC machined 6061-T6 aluminum mounting ends\u003c\/li\u003e\n\u003cli\u003eMassive 5\/8-inch hard chrome plated heat-treated alloy steel shaft\u003c\/li\u003e\n\u003cli\u003eRace-developed high-flow piston design\u003c\/li\u003e\n\u003cli\u003eApplication-specific valving to maximize performance\u003c\/li\u003e\n\u003cli\u003eLong-lasting clear anodized finish\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eKit Components:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIncludes one BDS013353, 2020-2023 Ford Ranger 3.5 inch Box Kit - Steel OE Knuckle, UPC Code 711745611757\u003c\/li\u003e\n\u003cli\u003eIncludes two FOX98224880, Fox 2.0 Shock 26.35 x 16.75 x 2- EB1\/EB1\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BDS Suspension","offers":[{"title":"Default Title","offer_id":45074102485199,"sku":"BLDV_BDS1906FS","price":1484.89,"currency_code":"USD","in_stock":false}],"url":"https:\/\/latemodeltruck.com\/products\/3-5-inch-lift-kit-ford-ranger-19-23-4wd-cast-steel-fox-2-0-performance-shocks","provider":"Late Model Truck","version":"1.0","type":"link"}